602 Crate Engine
| GM 602 Crate Engine | $3,250.00 |
| GM Fuel Pump Push Rod | |
| GM Fuel Pump Plate | |
| Carter Fuel Pump | |
| Fuel Pump Gasket | |
| Oil Filter Adapter | |
| Oil Filter Adapter Bolts | |
| Fram HP4 Oil Filter | |
| HP Oil Pump Drive Shaft | |
| Canton 20-032 Oil Pump Pick Up | |
| Canton 11-102T Oil Pan | |
| 1/8" & 1/2" Pipe Plugs | |
| Vacuum Advance Eliminator | |
| Autolite Racing Spark Plugs | |
| RPM Around the Back Plug Wires | |
| Misc. Lubes & Sealers | |
| 20W50 Race Oil - 7 Quarts | |
| Competition Cams Oil Supplement | |
| Disassemble & Assemble Engine | |
| Rework Distributor for Oil Control | |
| Dyno Time and Sealing Engine | |
| Dyno Fuel | |
|
Total |
$4570.86 |
602 Accessories
| Holley #80541-1 (650CFM) |
$675.00 |
| -8 AN Braided Dual Fuel Line Kit |
$62.20 |
| Fuel Pump to Carburetor Fuel Line Kit |
$40.88 |
| KRC Crate Engine Serpentine Kit - Power Master Denso 50 AMP Alt. KRC Alum. Power Steering Pump KRC Alum. Water Pump KRC Hardware belts/brackets See Photo of Kit |
$1,000.00 |
| Install KRC Serpentine Kit on Motor | $70.00 |
| Power Master Light Weight Starter | $175.00 |
| Power Master Ultra Light Weight Starter | $220.00 |
| Carburetor Studs & Hardware | $6.25 |
| Howe Hydraulic Throw Out Bearing |
$143.12 |
| Steel Flywheel 16 lbs | $169.95 |
| RPM Light Weight Clutch Kit | $340.00 |
| Lakewood Steel Bellhousing | $275.00 |
| Flywheel Bolt Kit | $9.75 |
| Pressure Plate Bolt Kit | $8.75 |
| Spark Plug Wire Holders | $10.00 |
| Extra Long Dowel Pins | $12.25 |
| Engine Lift Plate & Hardware | $16.00 |
| Engine Stand & Hardware | $40.00 |
|
Options |
|
| Customer Supplied Engine (Addt'l Inspection) | $100.00 |
| Reseal P.C.C.W Engines | $100.00 |
| Reseal Engine with TSS or GM Bolts (Includes the following: Oil Pan Gasket, Timing Cover Gasket Kit, Valve Cover Gaskets, Dyno Fuel, Rework Distributor for Oil Control, Disassemble & Assemble, Inspect Lower End, Inspect Heads/Rocker Arms/Value Springs, Inspect Cam and Cam Timing, Dyno Time & Sealing Engine) | $718.00 |
Due to the issues around security and internet pricing please confirm pricing when ordering engine. RPM and website creator will do their best to insure price is listed accurately.
ZZ4 - 603 Crate Engine
| GM ZZ4 Crate Engine | $4,000.00 |
| HP Chevy Steel Timing Cover | |
| Manley Timing Cover Bolts | |
| Timing Cover Gasket Kit | |
| Timing Tab | |
| GM Fuel Pump Push Rod | |
| GM Fuel Pump Plate | |
| Fuel Pump Gasket | |
| Oil Filter Adapter | |
| Oil Filter Adapter Bolts | |
| Fram HP4 Oil Filter | |
| HP Oil Pump Drive Shaft | |
| Melling HV Oil Pump | |
| Melling Oil Pump Spring | |
| Moroso Oil Pan | |
| Moroso Oil Pump Pick Up | |
| 1/8" & 1/2" Pipe Plugs | |
| GM Main Bearing Bolts (3) | |
| Vacuum Advance Eliminator | |
| MSD Distributor Wire Harness | |
| ARP Rocker Arm Studs | |
| Crane Rocker Arm Adjusting Nuts | |
| GM Valve Covers | |
| Valve Cover Breathers (2) | |
| BHJ Harmonic Balancer | |
| Harmonic Balance Bolt & Washer | |
| Pilot Bushing | |
| RPM Around the Back Plug Wires | |
| Misc. Lubes and Sealers | |
| 20W50 Race Oil - 7 Quarts | |
| Competition Cams Engine Oil Supplements | |
| Disassemble & Assemble Engine | |
| Rework Distributor for Oil Control | |
| Install MSD Wiring Harness in Distributor | |
| Dyno Time & Sealing Engine | |
| Dyno Fuel | |
|
Total |
$5,951.22 |
ZZ4 - Accessories
| 4412 2BRL Carburetor (Baker) | $665.00 |
| Carburator Studs & Hardware | $6.25 |
| Fuel Pump to Carb. Fuel Line Kit - 8 | $40.88 |
| Carb. Fitting - 8 AN | $7.75 |
| KRC Crate Engine Serpentine Kit - Power Master Denso 50 AMP Alt - KRC Aluminum Powersteering Pump, KRC Aluminum Water Pump, KRC Harware/Belts/Brackets. | $1000.00 |
| Install Front ACC. on Motor | $70.00 |
| Spec. Quarter Master 2 Disc Clutch | $475.00 |
| Spec. GM Flywheel | $106.74 |
| ARP Pro Flywheel Bolts | $10.39 |
| Power Master Light Weight Starter | $175.00 |
| Power Master Ultra Light Weight Starter | $220.00 |
| Quarter Master Aluminum Bellhousing 10lbs | $375.00 |
| Extra Long Dowl Pins | $12.25 |
| Spec. MSD Control Box 6AL | $225.00 |
| MSD External Coil | $47.25 |
| Spark Plug Wire Holders | $10.00 |
| Long Pilot Bushing | $18.50 |
| Engine Lift Plate Kit | $16.00 |
| Engine Stand | $40.00 |
|
Options |
|
| Customer Supplied Engine (Addt'l Inspection) | $100.00 |
| Reseal P.C.C.W Engine | $100.00 |
| Reseal Engine with TSS or GM Bolts (Includes the following: Oil Pan Gasket, Timing Cover Gasket Kit, Valve Cover Gaskets, Dyno Fuel, Rework Distributor for Oil Control, Disassemble & Assemble, Inspect Lower End, Inspect Heads/Rocker Arms/Value Springs, Inspect Cam and Cam Timing, Dyno Time & Sealing Engine) | $718.00 |
If you're not running an RPM Engine... You Must be following someone who is!
